Steering Lock Replacement
Remove the steering column.
2. | Center punch each of the two shear bolts, and drill their heads off with a 5 mm (3/16 in.) drill bit. Be careful not to damage the switch body when removing the shear bolts.
|
3. | Remove the shear bolts from the switch body.
|
4. | Install the switch body without the key inserted.
|
5. | Loosely tighten the new shear bolts.
|
6. | Insert the ignition key, and check for proper operation of the steering wheel lock and that the ignition key turns freely.
|
7. | Tighten the shear bolts (A) until the hex heads (B) twist off.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals