Roof Molding Replacement
| 1. | Apply protective tape to the body (A). Using a flat-tip screwdriver wrapped with protective tape (B), pry up on the roof molding (C). Take care not to scratch the body.
 |
| 2. | Pull up and slide the roof molding to release the front bracket (D) from the pin (E).
|
| 3. | Pull up the front portion of roof molding.
 |
| 4. | Pull up and release the rear bracket (A) from the pin (B), then remove the roof molding (C).
 |
| 5. | Install the molding in the reverse order of removal, and note these items:
- Take care not to damage the windshield molding.
- Make sure the roof molding is installed securely.
 |
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals
