Honda Fit/Jazz - Rear License Trim Replacement
Rear License Trim Replacement
NOTE: Put on gloves to protect your hands.
2. | From inside the tailgate, remove the bolts (A) securing the rear license trim (B).
|
3. | From inside the tailgate, release the clips (C, D) while holding the rear license trim.
|
4. | Remove the rear license trim (A). Take care not to scratch the tailgate.
|
5. | Install the trim in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Do not roll up the lip (E) of the rear window rubber dam. If necessary for proper attachment, set a plastic plate between the lip and trim. Install the top edge of the trim while sliding a plastic plate sideward. Be careful not to cut the lip.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals