Honda Fit/Jazz - Power Relays Test
Documents and Books Scanning ServiceBest Prices! Fast fulfillment, OCR Included
Power Relays Test
Use this chart to identify the type of relay, then do the test listed for it.NOTE: See page 22-102 for the turn signal/hazard flasher control circuit input test.
| Relay | Test |
|---|---|
| A/C compressor clutch relay | Normally-open type A |
| A/T reverse relay | |
| Blower motor relay | |
| Condensor fan relay | |
| Headlight relay | |
| Horn relay | |
| PGM-FI main relay 1 | |
| PGM-FI main relay 2 | |
| Power mirror defogger relay | |
| Power window relay | |
| Radiator fan relay | |
| Starter cut relay | |
| Taillight relay | |
| EPS motor relay | Normally-open type B |
| Power door lock/fuel lid lock relay | Five terminal type |
| Power door unlock/fuel lid unlock relay | |
| Sunroof open relay | |
| Sunroof close relay | |
| Left super locking relay | |
| Right super locking relay |
Normally-open type A:
Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 2 terminals when power and ground are connected to the No. 3 and No. 4 terminals.
- There should be no continuity between the No. 1 and No. 2 terminals when power is disconnected.
type 1:
type 2:
· PGM-FI main relay 1
· PGM-FI main relay 2
type 1:
type 2:
Normally-open type B:
Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 3 terminals when power and ground are connected to the No. 2 and No. 4 terminals.
- There should be no continuity between the No. 1 and No. 3 terminals when power is disconnected.
Five terminal type
Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 2 terminals when power and ground are connected to the No. 3 and No. 5 terminals.
- There should be continuity between the No. 1 and No. 4 terminals when power is disconnected.
Documents and Books Scanning ServiceBest Prices! Fast fulfillment, OCR Included
