Honda Fit/Jazz - Cylinder Honing
Place your banner in PDF ManualTry if FREE Today!
Cylinder Honing
Only a scored or scratched cylinder bore must be honed.3. | When honing is complete, thoroughly clean the engine block of all metal particles. Wash the cylinder bores with hot soapy water, then dry and oil them immediately to prevent rusting. Never use solvent, it will only redistribute the grit on the cylinder walls. |
4. | If scoring or scratches are still present in the cylinder bores after honing to the service limit, rebore the cylinder block. Some light vertical scoring and scratching is acceptable if it is not deep enough to catch your fingernail and does not run the full length of the bore. |
Place your banner in PDF ManualTry if FREE Today!