Honda Fit/Jazz - Connecting Rod and Crankshaft End Play Inspection
Connecting Rod and Crankshaft End Play Inspection
2. | Measure the connecting rod end play with a feeler gauge between the connecting rod and crankshaft.
Connecting Rod End Play:Standard (New): | 0.15-0.30 mm (0.006-0.012 in.) | Service Limit: | 0.40 mm (0.016 in.) |
|
4. | Push the crankshaft firmly away from the dial indicator, and zero the dial against the end of the crankshaft. Then pull the crankshaft firmly back toward the indicator; the dial reading should not exceed the service limit.
Crankshaft End Play:Standard (New): | 0.10-0.35 mm (0.004-0.014 in.) | Service Limit: | 0.45 mm (0.018 in.) |
|
5. | If the end play is out-of-tolerance, replace the thrust washers and recheck, if it is still out-of-tolerance, replace the crankshaft.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals