Honda Fit/Jazz - Center Console Removal/Installation
Center Console Removal/Installation
NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to scratch the front seat, dashboard, and related parts.
| 1. | Remove the parking brake cover lid (A).
 |
| 2. | M/T: Remove the shift knob.
 |
| 3. | Remove the center console (A):
| -1 | Remove the screws (B), and clips (C).
| | -2 | Lift the rear of the console up to detach the clip (D), and pull the console rearward to release the front hook (E) from the heater unit.
| | -3 | Disconnect the cigarette lighter connector (F).
|
 |
| 4. | Install the console in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Make sure the wire harness is not pinched.
- Set the rib (G) under the pocket onto the parking brake lever bracket (H) correctly.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals
