Honda Fit/Jazz - ATF Strainer and Main Valve Body Removal (CVT)
ATF Strainer and Main Valve Body Removal
1. | Remove the ATF passage pipe (A).
|
2. | Remove the ATF strainer (B).
|
3. | Remove the ATF pass body (C), dowel pins (D), and separator plate (E).
|
4. | Remove the start clutch accumulator valve spring (F) and valve (G), then remove the main valve body (H) and dowel pins (I).
|
5. | Remove the ATF magnet (J), and clean it, then reinstall it in the flywheel housing (K).
|
6. | Replace the O-rings (L) with new ones, and install the all parts in the reverse order of removal.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals