Honda Fit/Jazz - A/T Shift Lock Solenoid Test (CVT)
A/T Shift Lock Solenoid Test
Remove the center console.
2. | Remove the shift lock solenoid connector from the shift lever bracket base, then disconnect the connector.
|
3. | Connect the battery positive terminal to shift lock solenoid connector terminal No. 3, and connect the battery negative terminal to the terminal No. 4.
NOTE: Do not connect the battery positive terminal to the terminal No. 4 or you will damage the diode inside the shift lock solenoid.
|
4. | Check that the shift lever can be moved from the P position. Release the battery terminals from the shift lock solenoid connector. Move the shift lever back to the P position, and make sure it locks.
|
5. | 5. Check that the shift lock releases when the shift lock release is pushed, and check that it locks when the shift lock release is released.
|
6. | If the shift lock solenoid works improperly, replace it.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals